CPcam 8/16 CH MPEG-4 DVR Bedienungsanleitung

UserUser’’s Manuals ManualDigital Video Digital Video RecorderRecorderCPD507 V0.983CPD507 V0.983Please read instructions thoroughly before operation a

1) DISK ARRAY PORT: Connect to disk array for extend HDD capacity.2) IR:Connect to IR receiver.3) RS485:Connect to external device (such as PTZ camera

10) POWER:Connect to provided adapter.11) FAN:For ventilation.12) VIDEO INPUT (CHANNEL 1 - 16 / CHANNEL 1 - 8) :Connect to video source, such as camer

INSTALLATION AND CONNECTIONINSTALLATION AND CONNECTION2.1 PHYSICAL CONNECTION2.1 PHYSICAL CONNECTION81) Install HDDs:The HDDs must be installed before

2.2 GETTING STARTED2.2 GETTING STARTED9NOTE : When “HDD not found”message shows up, please refer to appendix # 1. It may result from the improper inst

3.1 MOTION DETECTION SETTING3.1 MOTION DETECTION SETTING10Scenario : WarehouseDifferent environments may require different settings, the sample below

BASIC OPERATIONBASIC OPERATION3.2 NETWORK BACKUP3.2 NETWORK BACKUP114.1 RECORDING4.1 RECORDINGThe DVR offers three recording modes, manual record, eve

Press “ PLAY ” button, the DVR will display the last recording video.1) FAST FORWARD (F.F. ) & FAST REWIND (REW):You can increase speed for fast f

DETAILED MENU CONFIGURATIONDETAILED MENU CONFIGURATION5.1 MENU TREE5.1 MENU TREE13DATE: DATE: YEAR MONTH DAY YEAR MONTH DAY FORMAT: YFORMAT: Y--MM--D

5.2 ACCESS MENU5.2 ACCESS MENU14(MENU)RECORDTIMERDATEADVANCEThere are 4 options available in the main menu:RECORD -------- Record mode setup.TIMER --

5.3 MAIN MENU OPTIONS___RECORD5.3 MAIN MENU OPTIONS___RECORDMove the cursor to the “RECORD”, and press ”ENTER”, then the screen will show the followin

Thank-You Note Before You Get StartFirst of all, we would like to express our gratitude to you for purchasing this product. This product is designed t

8) EVENT RECORD IPS:Recording is activated by event (alarm and motion trigger). Select the images per second for event record, The options are as the

5.5 MAIN MENU OPTIONS___DATE5.5 MAIN MENU OPTIONS___DATE(MENU)RECORDTIMER►DATEDATEADVANCEMove the cursor to the “DATE”, and press ”ENTER”, then the sc

5.6 MAIN MENU OPTIONS___ADVANCE5.6 MAIN MENU OPTIONS___ADVANCEMove the cursor to the “ADVANCE”, and press ”ENTER”, then the screen will show the follo

1) TITLE:Move the cursor to the title which you want to change, and press “ENTER” to access the setting screen. Assign each channel a title (up to six

1) TITLE:Show the title of each channel of the camera.2) DET:Select “ON” to activate the motion detect function of each channel.Select “OFF” to inacti

5.9 ADVANCE MENU ___DISPLAY5.9 ADVANCE MENU ___DISPLAYMove the cursor to the “DISPLAY”, and press ”ENTER”, then the screen will show the following opt

5.10 ADVANCE MENU ___ALERT5.10 ADVANCE MENU ___ALERTMove the cursor to the “ALERT”, and press ”ENTER”, then the screen will show the following options

5.11 ADVANCE MENU ___REMOTE5.11 ADVANCE MENU ___REMOTEMove the cursor to “REMOTE”, and press ”ENTER”, then the screen will show the following options.

245.12 ADVANCE MENU ___SYSTEM5.12 ADVANCE MENU ___SYSTEMMove the cursor to the “SYSTEM”, and press ”ENTER”, then the screen will show the following op

5.13 ADVANCE MENU ___NETWORK5.13 ADVANCE MENU ___NETWORK2511) LANGUAGE:Press “ENTER”, and select the language of the OSD.12) VERSION:The firmware vers

The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence of uninsulated“dangerous volta

5.14 ADVANCE MENU ___ BACKUP5.14 ADVANCE MENU ___ BACKUP26Move the cursor to the “BACKUP”, and press ”ENTER”, then the screen will show the following

275.15 ADVANCE MENU ___HDD INFO5.15 ADVANCE MENU ___HDD INFOHDD INFOHDD INFOHDD NUM HDD SIZE HDD NUM HDD SIZEMASTER 400.517 SLAVE NO HDDEXT001 400.517

ADDITIONAL OPERATIONADDITIONAL OPERATION6.1 SEARCH6.1 SEARCH28Press “ ” + “ ” buttons on the front panel of the DVR to enter the search mode. Then the

6.2 2X DIGITAL ZOOM6.2 2X DIGITAL ZOOM296.4 SWITCH THE N/P SYSTEM6.4 SWITCH THE N/P SYSTEM1) Press “POWER” button to shutdown, and then press “POWER”

306.5 USB UPGRADE6.5 USB UPGRADE6.6 LICENSED SOFTWARE AP6.6 LICENSED SOFTWARE AP1)1)Install the SoftwareInstall the Software:  Put the attached CD in

312)2)Software OperationSoftware Operation:  Connect DVR with PC via RJ45 network line.LAN Setting :LAN Setting :The default DVR IP is “192.168.1.1

32 Introduction of Basic Operation : Video Web Server Control Panel.Digital Device Control Panel ~ 16CH DVRDigital Device Control Panel ~ 16CH DVRa.

33g. Record : press this button, the video web server will start to record, and press this button again to stop record. The recording files will be sa

34Digital Device Control Panel ~ PTZDigital Device Control Panel ~ PTZ Hot Point: You can control your PTZ camera screen to a specific point by using

35 Playback Operation.a. Snapshotb. Stopc. Paused. Fast Rewind (1X, 2X, 4X, 8X, 16X)e. Slow Rewind (1X, 1/2X, 1/4X, 1/8X, 1/16X)f. PLAY (1X)g. Slow P

PARTS AND FEATURESPARTS AND FEATURES1.1 FEATURES ----------------------------------------------------------------------------------------------------

363)3)Advanced SettingAdvanced Setting:  Press “System Config ” button to enter the system setting page. In this system setting page, you can select

37DDNSDDNS DDNS is a service for transforming dynamic IP to corresponding to a specific “Hostname”. Enable the DDNS function.Key in the “DDNS userna

38AccountAccountabcdef Set up the user’s account ( Max 5 accounts) , password, life time, and authority level ( Max 5 accounts on Max 5 accounts on l

39 You can get all the online users’information here (Name, IP Address, Authority Level, Resolution, and Image Quality).Online UserOnline User219.85.

40MailMailNote: To get alarm mail when there is a motion trigger, you must enable the function of e-mail notification in the Alarm setting.  When al

41 Snapshot Path:You can assign the route for snapshot image. Record Path:You can assign the route for recording file. Alarm Audio Path:You can mod

42 You can edit all the external device in this Windows. Select the device, and then press “Edit” button to set up “Device Type”, “ID No.”, “Protoco

43Tool BoxTool Box You can get the information of firmware version in the window. You can select “turbo step” (1 - 10).To speed up menu selecting or

44Network BackupNetwork Backup Users could backup the recorded files to the PC from DVR via network. Set backup information, and then press “Start”

You can also connect to the video Web Server E via IE browser. This function is suitable in both Windows 2000 and Windows XP.This function is suitable

PARTS AND FEATURESPARTS AND FEATURESDVR FeaturesDVR Features MPEG-4 real time compression format High resolution recording (For 16 channels):Frame:

46Step 4Step 4: Choose “Windows Offline Installation” or “Windows Online Installation”. Step 6Step 6: After installation, please type the IP address o

476.9 GPRS6.9 GPRS6.8 R.E.T.R.6.8 R.E.T.R.Before you activated the R.E.T.R. function,please set the detection area and activated the motion detection

TROUBLE SHOOTINGTROUBLE SHOOTING7.1 FAQ7.1 FAQPlease refer to the FAQ table below for easy trouble shooting. The table below describes some typical pr

7.2 CPCAM GLOBAL SERVICE7.2 CPCAM GLOBAL SERVICE49

APPENDIX #1APPENDIX #1APPENDIX #1 APPENDIX #1 ––INSTALL THE HDDINSTALL THE HDD50Carefully following the steps to ensure correct installation.*** Note:

APPENDIX #2APPENDIX #2APPENDIX #2 APPENDIX #2 ––PIN CONFIGURATIONPIN CONFIGURATIONPIN 1. GNDGNDGROUND PIN 2. ~ PIN 9. ALARM INPUTALARM INPUTTo conne

APPENDIX #3APPENDIX #352APPENDIX #3 APPENDIX #3 ––RECORDING TIME TABLERECORDING TIME TABLE1. Take NTSC system and outdoor environment as an example.2.

APPENDIX #4APPENDIX #453APPENDIX #4 APPENDIX #4 ––COMPATIBLE USB BRANDCOMPATIBLE USB BRANDNOTE: Please upgrade the firmware of the DVR to ensure the a

APPENDIX #5APPENDIX #554APPENDIX #5 APPENDIX #5 ––COMPATIBLE HDD BRANDCOMPATIBLE HDD BRANDNOTE: Please upgrade the firmware of the DVR to ensure the a

1.3 SPECIFICATION1.3 SPECIFICATION216 12 grid per camera for all channelsMotion Detection Area4 audio inputs, 2 audio outputs (Mono)Audio I/O4 adjust

 Design and specification are subject to change without notice.Support 2 USB 1.1 ports (front panel * 1, back panel * 1)USB Interface8 channels:8 in

1.4 FRONT PANEL1.4 FRONT PANEL4a b c d e f g hi j k l m n1) POWER: (a)Press “POWER” button to turn on/ turn off the DVR. (Under recording mode, ple

58) “ ”: (i)Press “ ” button to pause the play back files.9) “ ”: (j)Press “ ” button to stop the play back files.10) “ “: (k)Under playback mode,